Gantom 7 User Guide
Version 1.0 – 12/15/2017
CONFIGURING THE LIGHT FIXTURE
The Gantom 7 is programmed and configured using the free DMX Programmer App by Gantom. In
addition to setting the DMX starting address for the fixture, the app allows you to save a default color
and brightness for standalone operation of the light fixture if the application does not require any DMX
control.
What you need:
o
An Android or iOS device for running the Gantom Programmer app. Please note that a
headphone port is required to connect to the device to the fixture. The iPhone7 does work
with, but you will need to use the headphone port adapter that is included with the phone.
o
A male-to-male 3.5mm audio 3.5mm cable. This is the same type of cable that you would use to
connect your Android or iOS device to headphones or to an AUX port.
o
Power supply for the fixture. All Gantom fixtures accept 12v DC power. We recommend using
one of our PowerPak Mini units if you are just going to power a single fixture.
o
The free
DMX Programmer
app by Gantom. This can be found by searching “Gantom” in iTunes
for an Apple device or Google Play for an Android device
o
If you have a Gantom Pro series fixture, you will also need the CB107 programming adapter
cable
First, open the
DMX Programmer
app by Gantom. The app will open to
the screen you see here. From this screen, select
Generic Console
.
The app will then provide you instructions on how to connect the light
fixture to the tablet or smartphone. Please note the order in which the
cables should be connected. First connect the headphone cable to the
light fixture and to the tablet/smartphone. Next, connect the power to
the fixture. When prompted by the app, tap the “Next” button and you
will be taken to the control screen.
