Gantom 7 User Guide
Version 1.0 – 12/15/2017
POWER AND WIRING REQUIREMENTS
The Gantom 7 has a maximum fixture wattage of 7.5W and an operating voltage of 12V DC. For
recommended power supplies check
http://www.gantom.com/power-supplies/
Gantom’s standard DMX controllable light fixtures have a 2.1mm DC barrel jack for power and a 3.5mm
TRS jack for the control signal. Additionally, screw terminal adapters are included with every fixture to
simplify custom wiring. You can screw bare wires directly into these adapters
Rather than using a typical XLR cable for carrying the DMX signal, standard
Gantom fixtures use 3.5mm TRS cables. Gantom makes an XLR 5 Pin to 3.5mm
TRS adapter (product number CB51) that is perfect for connecting Gantom
products to an XLR based DMX environment.
The Gantom 7 is also available in our Gantom Pro configuration. This version has a single locking
connector which combines both power and data into one cable. This version is compatible with our G8
Power/Data Distribution Box and Pro Cable system. A single cable for power and data greatly simplifies
installation and the locking connector gives a secure connection for long term use. The Gantom Pro
series is recommended for permanent installations.
BARE WIRE PINOUT
Power
+
RED
-
BLUE
DMX signal
D+
GREEN
D-
YELLOW
COM
BLACK
