Q.uick Start Guide
Q.brixx
55
Gantner Instruments Inc.
USA | China | Singapore | India | Austria | Germany | France | Sweden
1550 Hotel Circle N ∙ Suite 180 ∙ San Diego CA ∙ 92108 ∙ T +1 888 ∙ 512 ∙ 5788
[email protected]
www.gantner-instruments.com
sensor failure is also configured in this section. At failure, the sensor will display
either:
-
Corresponding Limit
-
Stay at Last Value
-
User selected Default Value
This error handling can be activated or deactivated.
11.
Additionals: this column adds/removes/modifies any filters (average, lowpass,
highpass, or bandpass).
Virtual Variables
Virtual Variables are variables that are composed of real variables and/or other virtual
variables. These variables can be created inside the measurement module in the form
of arithmetic channels, signal conditioning channels, or set points. They can also be
created inside the controller under the virtual variables section.
Inside the Measurement Module
