GT7 Terminal
Configuration
www.gantner.com
HB_GT7-2x00-3x00--EN_12
55
5.6.14
Sub Controller
This configuration page is only displayed if an app is running that also uses Sub Controller (e.g., Central
Locker App).
Figure 5.35
– GT7 terminal web interface – Sub controller
These settings apply to the sub controller connected to the GT7 terminal.
- Emergency mode:
These settings determine how the sub controllers behave with the lockers when the
connection between the GT7 terminal and the host software (e.g., Relaxx) is
disconnected.
- Disabled:
All lockers can only be locked or unlocked by a master card.
- Full:
All free lockers and personal lockers can continue to be used as they
were configured before the interruption.
- Unlock only: Each user can unlock their locker, but they cannot lock another locker
after that.
- Last user: The last user who used a locker can lock/unlock their locker.