Gantner GAT Vending 6100 BA, Installation, Configuration & Operation

Page: 18 / 48

GAT Vending 6100 BA
Electrical Connections
18
HB_GAT-VENDING6100BA--EN_121
www.gantner.com
4.2 Ethernet Connection
The GAT Vending 6100 BA has one Ethernet connection, which is available via the RJ45 socket on the rear part of
housing. A direct Ethernet connection to the GAT Vending 6100 BA is only required for configuration.
To connect via Ethernet, one network cable with a minimum specification of CAT 5 (STP) is required. The GAT
Vending 6100 BA supports data rates of 10 to 100 Mbit/s. It is recommended to provide a separate port at the
switch or patch panel for each GAT Vending 6100 BA terminal.
Figure 4.2 - Ethernet network
► Connect the Ethernet cable to the RJ 45 port on the back part of the GAT Vending 6100 BA housing.
1 ....... Ethernet cable
Figure 4.3
– Ethernet connection