![background image](http://html1.mh-extra.com/html/gantner/gat-net-lock-7020-system/gat-net-lock-7020-system_installation-configuration-and-operation_560968006.webp)
GAT NET.Lock 7020 System
6
HB_GAT-NETLOCK7020--EN_12
www.gantner.com
Important Safety Information
−
The installation, commissioning, and servicing of our products must be performed only by suitably trained
personnel. In particular, electrical connections must only be made by correspondingly qualified specialists.
Always observe the relevant installation regulations in accordance with the national Electrical Engineers
Association.
➔
Unqualified personnel may potentially perform actions that result in injury due to electrical shock.
−
Where not otherwise stated, installation and maintenance work on our products must be carried out when
disconnected from the power supply. This applies in particular to appliances that are normally supplied by
low-voltage current.
➔
If the appliance is not disconnected from power, touching terminals or other internal parts of the
appliance may lead to injury due to electrical shock.
−
It is prohibited to alter the products (devices, cabling, etc.).
➔
Alterations to the products may subsequently result in personal injury, property damage, or damage to
the products.
−
Do not remove protective shields and covers.
➔
Removing protective shields and covers may result in personal injury or property damage.
−
Do not attempt to repair a product after a defect, failure, or damage is detected. In addition, do not put the
product back into operation. In such cases, it is essential to contact your GANTNER representative or the
GANTNER support hotline.
−
The installation, commissioning, operation, and maintenance of the product must be carried out in
accordance with the technical conditions of operation as described in the corresponding documentation.
Therefore, it is essential to read the corresponding chapter of this manual and observe the instructions and
information therein.
−
If there are still some points that are not entirely clear, please do not take a chance. All queries can be
clarified by your GANTNER representative or by ringing the GANTNER support hotline.
−
Directly on receipt of the goods, inspect both the packaging and the product itself for any signs of damage.
Also check that the delivery is complete and includes all accessories, documentation, auxiliary devices,
etc.
−
If the packaging or product has been damaged in transport, or should you suspect that it may have a fault,
the product must not be put into service. Contact your GANTNER representative who will endeavor to
resolve the problem as quickly as possible.
−
GANTNER Electronic GmbH accepts no responsibility for any injuries or damage caused as a result of
improper use.
Although great care is taken and we are continuously aiming for improvement, we cannot completely exclude the possibility of
errors appearing in our documentation. GANTNER Electronic GmbH therefore accepts no responsibility for the completeness or
the accuracy of this manual. The right is reserved to make alterations at any time without prior notice.
Should you discover any fault with the product or in its accompanying documentation, or you have any suggestions for
improvement, you may confidently inform your GANTNER representative or GANTNER Electronic GmbH directly.
We especially look forward to hearing from you if you want to let us know that everything is functioning perfectly.
Summary of Contents for GAT NET.Lock 7020 System
Page 2: ......
Page 36: ...GAT NET Lock 7020 System Installation 36 HB_GAT NETLOCK7020 EN_12 www gantner com ...
Page 63: ......