Appendix
27
Hydromette® BL LG 17
short blast of compressed air or similar to accelerate the drying
process.
4.3
Maintenance
Soiling of the sensor head results in falsification of the measured
value. Therefore, the sensor head must be checked regularly for
soiling. In the case of heavy soiling or when the sensor head is
wetted with liquids, the sensor outputs an error signal. In this case,
clean the sensor as described below. If the error signal does not
disappear after cleaning and drying, the sensor must be sent to the
manufacturer for examination.
5 Appendix
5.1
General Concluding Remarks
The conclusions to be drawn from the measurement results are
related to the individual conditions and the knowledge from
professional experience for each user.
Warranty Conditions
Gann Mess- u. Regeltechnik GmbH shall rectify material or
manufacturing defects at no cost by repair or replacement of the
defective part at its discretion that occur within six months of
purchase or one year of despatch from the factory, whichever
period ends first. Neither the replacement nor the repair of a part
constitutes a new warranty or an extension of the original warranty
period.
Batteries or other wear parts such as cables or filter fabric are
excluded from the warranty.
