16/20
6.9
：
The chamfer depth is the thickness of the slab.
6.10
：
The depth of the reverse chamfer is the thickness of the slab.
6.11
：
When the machine is cutting, the head is at 0 degrees.
：
When cutting, the head is tilting at 45 degrees, the upper surface of the
cut slab is larger than the lower surface.
：
When cutting, the head is tilting at 45 degrees, the lower surface of the
cut slab is larger than the upper surface.
Attention:
The use of the bu
ttons for “Rear”, “Left” and “Right” is the same as the “Front”
button.
6.12
: Only valid for CAD function processing; every time the depth of straight
cutting increases by 1mm, the cutting depth of the machine will increase downward by 1mm.
