12
same time, only place calibrating weights on the platform, after
stability, the weight displaying window shows the weight of the
calibrating weights and the unit weight displaying window shows“0”,
till now the calibration is completed and the scale can be normally
used and count. Under the calibration status, press “TARE”, it will
quit.
5.3 Charge the battery:
When battery is near empty, one single charge more than 10 hours
and battery symbol dynamic display, after filled, the battery symbol is
not indicated, at the same time, it can continue charge. Scale can work
normally when charging.
6. Display information of counting scale
6.1 The weight display window displays the following information:
F----1
Date over display scope
F----2
A/D-switch is defect
F----3
Key is defect
F----5
Sensor signal is defect
F----L
Lower zero position of sensor signal
F----H
Object weight over capacity
C----F
Calibration error, instability or not at zero point during
