15
Default setting is 6 .
C4---- Communication setting. “TARE” changes the lower unit.
“M+” changes the high unit. This date is the first date during
communication. Default setting is 27.
Holding down the “TARE” and power on , all the parameters can be
reset to default settings, re-calibration before using.
8. Serial communication
8.1 Serial communication protocol: baud rate: 600-9600 can set, the
default settings is 9600; data units: 8 units; ending unit: 1 unit; no
calibration unit.
8.2 Data format: 41-bit data output
（
ASCII code
）
。
WT
space
negative
data
unit
enter
2 unit
1 unit
1 unit
7 unit
3 unit
1 unit
UW
space
data
unit
enter
2 unit
1 unit
6 unit
2 unit
1 unit
QT
space
data
unit
enter
linefeed
2 unit
1 unit
5 unit
4 unit
1 unit
1 unit
When data is not negative, the negative unit is space, no showing
data is also space.
For example: weight showing 12.345 kg, unit weight showing 12.34,
