Operation
G&D OperatorPanel ·
10
English
Operation
In the default settings, pressing and holding the
Enable
button prevents you from
switching channels by accident.
How to switch to a channel of the connected KVM switch:
1.
Only if »Safety Switching« is enabled (default):
Press and hold the
Enable
button.
2. Press the
Select
button of the channel you want to switch to.
ADVICE:
You can disable the Safety Switching function (see page 7) if you only
want to use the
Select
button to switch between channels.
NOTE:
Every three seconds, the device checks the active channel.
If you change the channel in the meantime, the device switches to the channel
that is selected at the
OperatorPanel
.
To prevent automatic switching, you can change the