Setup menu
7
· G&D OperatorPanel
How to select the bit rates of the RS232 interface:
1. Start the terminal emulator.
2. Load the connection settings of the setup menu and establish the connection.
3. Use the
Arrow
or
Arrow
keys to select
Bitrate RS232 Port
.
4. Press
Space
(repeatedly) to choose between the following options:
5. Press
S
to save the values.
6. Press
Q
to return to the main menu.
Safety Switching
To switch to a channel, press and hold the
Enable
button and press the
Select
button
to switch to the desired channel.
Pressing and holding the
Enable
button prevents you from switching between chan-
nels by accident.
You can disable the
Safety Switching
function (see page 7) if you only want to use a
Select
button to switch between channels
How to enable/disable »Safety Switching«:
1. Start the terminal emulator.
2. Load the connection settings of the setup menu and establish the connection.
3. Use the
Arrow
or
Arrow
keys to select
Safety Switching
.
4. Press
Space
to disable (
Off
) or enable (
On
) the function.
5. Press
S
to save the values.
6. Press
Q
to return to the main menu.
9.600
19.200
38.400
57.600
115.200 (Standard)
230.400