
Configuration
35
· G&D DVIMUX2-DL-USB
Changing the bitrate of the Service port
The
Service
port transfers a certain amount of data per time unit. The bitrate is given
in
bit/s
.
If the bitrate cannot be adjusted to the standard bitrate of the KVM switch (115.200
bit/s) in the terminal emulator or the serial device, the bitrate of the
Service
port can
be modified.
How to select the bitrate of the Service port of the KVM switch:
IMPORTANT:
Transmitter and receiver of the data must use the same bitrate to
ensure successful communication between the terminal emulator or a serial device
and the KVM switch.
Se
tu
p Menu
1. Use the terminal emulator to establish a connection to the KVM switch.
If the setup menu is not displayed, the
Monitoring
mode of the service port is
enabled. Enter »
!
« to switch to the setup menu.
2. Use the
Arrow
or
Arrow
keys to select
Service Port Config
and press
Enter
.
3. Use the
Arrow
or
Arrow
keys to select the row
Bitrate
.
4. Press the
Space
key (repeatedly) to select between the following bitrates:
9600
19200
38400
57600
115200
(default)
230400
5. After having selected your desired settings, press
Q
to leave the dialog.
6. Press the
S
key to save your settings.
Summary of Contents for DVIMUX2-DL-USB
Page 51: ...Deutsch...
Page 99: ...English...