Installation
5
· G&D DP1.2-MUX2-NT
Connecting the workstation devices
PS/2 Keyb.:
Connect the connection cable of the
PS/2 keyboard.
If required, use the optional adapter
MD6M-
2xMD6F
(see figure on the right) to also connect the
mouse connection cable to the KVM switch.
USB K/M:
Connect the connection cable of the USB
keyboard and/or USB mouse.
Speaker:
Connect the speakers to this interface to output the audio signals from the
active computer.
DP Monitor:
Connect the DisplayPort cable of the monitor to this interface.
USB 3.0:
If you want to make USB devices available to the connected computers,
connect these devices to these interfaces on the
front panel
.
Figure 2: Interfaces for connecting the workstation devices
NOTE:
If mouse and keyboard of the workstation are PS/2 devices, connect them to
the
PS/2 K/M
interface. If they are USB devices, connect them to the
USB K/M
interfaces.
NOTE:
For multichannel devices, the interfaces
DP Monitor x
are placed above this
interface.
Connect the DisplayPort cables of the other monitors to these interfaces.
RS232
Network A
Network B
Speaker
PS/2 K/M USB K/M
DP Monitor
CPU In 2
DP CPU 2
DP CPU 1
USB 3.0
Line In PS/2 K/M USB K/M
CPU In 1
USB 3.0
Line In PS/2 K/M USB K/M
Mouse cable
Keyboard cable
PS/2 (switch)
