Initial configuration of the network settings
G&D DP-Vision-IP-Fiber ·
35
English
Configuring the network interface
How to configure the network interface:
1. Open the remote OSD of the computer module by pressing the
remote hotkey
(
default
:
Ctrl+Num
), if you want to change the configuration of the computer mod-
ule.
Open the local OSD of the console module by pressing the
local hotkey
(
default
:
Alt+Num
), if you want to change the configuration of the console module.
2. Select the row
Network setup
and press
Enter
(remote OSD) or
F11
, select the row
Net-
work
and press
Enter
(local OSD).
3. Select the entry
Interfaces
and press
Enter
.
4. Enter the following data under
Management
:
5. Press
F2
to save your settings.
Operational
mode:
Press
F8
to select the operational mode of the interface:
Off:
switch network interface off.
Static:
A static IP address is assigned.
DHCP:
IP address is obtained from a DHCP server.
IP address:
Enter the IP address of the interface.
The operational mode DHCP does not allow making entries.
Netmask:
Enter the netmask of the network.
The operational mode DHCP does not allow making entries.
Summary of Contents for DP-Vision-IP-Fiber
