Guntermann & Drunck GmbH
CATCenter Installation Guide
4.3
UCON-s
4.3.1
Front
After connecting the power cable, turn on the UCON-s using the toggle switch
at the back of the device. The LEDs on the front of the UCON-s have the
following meaning:
Red.
Main
Active
Status
Remote
Power
Status
Active
PC 1
PC 2
Trans
UCON-s
PC1
Active
Illuminated when TARGET1 is active.
Status
Illuminated when TARGET1 is running.
PC2
Active
Illuminated when TARGET2 is active.
Status
Illuminated when TARGET2 is running.
Trans
Active
Illuminated when the CATCenter is being accessed.
Status
Illuminated when the CATCenter is running.
Power
Red.
Illuminated if a redundant power supply is connected and is
supplying 12V.
Main
Illuminated if the main power supply is connected and
supplying power.
Remote
Active
Illuminated when a keyboard has been initialized.
Flashes when no keyboard has been initialized.
Status
Always illuminated when the CATCenter is operational.
4.3.2
Back
LEDs for every RJ45 interface are located at the back of the device.
These LEDs have the following meaning:
Mouse
Keyb. USB
Keyb.
Mouse
PS/2
Main Power
AC 100-240 V, 47-63 Hz
Monitor
PC 1
PC 2
Service
Transmission
12V DC/1,2A
Red. Power
Transmission LEDs
CPU LEDs
Yellow
Port is currently in use by a user
Port is currently in use by a user
Green
Connection has been established
to the CATCenter.
Connection has been established to the
local CPU via the CATpro2.
Page 32
