GS61004B-EVBCD
GaN E-HEMT Full Bridge Evaluation Board
User’s Guide
_____________________________________________________________________________________________________________________
GS61004B-EVBCD Rev 200106
© 2020 GaN Systems Inc.
www.gansystems.com 14
Please refer to the Evaluation Board/Kit Important Notice on page 27
Evaluation Test Setup
show the test setup for the PE29102 Full Bridge EVB setup. Make sure that
the specified safety precautions mentioned in “
Safety Precautions
” on page 2 are followed.
Figure 8 •
Connectivity
LS 4 Ohms
+
minimum
-
BNC or SMA/B PWM Input
DC “HV” Input: +12V to +30V
DC “LV” Input: +8V to +24V
On P1 Center Pin+, Outer Pins = GND
