GS61004B-EVBCD
GaN E-HEMT Full Bridge Evaluation Board
User’s Guide
_____________________________________________________________________________________________________________________
GS61004B-EVBCD Rev 200106
© 2020 GaN Systems Inc.
www.gansystems.com 4
Please refer to the Evaluation Board/Kit Important Notice on page 27
Evaluation Board Assembly Overview
The evaluation board (EVB) is assembled with two PE29102 GaN E-HEMT drivers and four
GS61004B E-HEMT transistors. Headers are included for signal input, signal output, and power
connections. Probe points are included for waveform measurements. Provision has been made for
a single, suitable heatsink to be fastened against the four E-HEMTs, using the three holes in the
center of the board.
Figure 1 •
GS61004B-EVBCD Evaluation Board Assembly
