Gamry Instruments Reference 30k Booster, Operator'S Manual

Page: 43 / 55

Reference 30k Booster Specifications
43
Appendix A: Reference 30k Booster Specifications
All specifications are at an ambient temperature of 25

C, 115 V
AC
power, and the Reference 30k Booster
operated with a Reference 3000 potentiostat unless otherwise noted.
All specifications are subject to change without notice.
Control Amplifier
Compliance Voltage +20 to –2.5 V
Compliance Current ±30 A
Voltage Gain 2
Unity-gain Bandwidth 500 kHz
Slew Rate >20 V/µs
30 A Current Range
Full-scale Current ±30 A
Accuracy ±0.3 % of range
System (all with a Reference 3000 potentiostat)
Control Modes Potentiostatic, Galvanostatic, ZRA
Allowed Current Ranges 30, 3, 0.3, 0.03 A
Mechanical
Dimensions (w x h x d) 37 x 23 x 44
14.5 x 9 x 17.5 cm
inch
Weight 16
35 kg
lbs
Power
Input Voltage 90 to 263 V
AC
Power (max.) 1200 W
A potentiostat system with a Reference 30k Booster connected to a Reference 3000 Potentiostat will not
oscillate with any capacitive load as long as the Reference electrode impedance is less than 10 kΩ and the
control amplifier bandwidth is Normal or slower.
A galvanostat system with a Reference 30k Booster connected to a Reference 3000 Potentiostat will not
oscillate with any resistive load less than 100
Ω as long as the control amplifier bandwidth is Normal or slower.
This is only guaranteed when the cell is connected using Gamry’s P/N 985-00122 cable. Stability with inductive
loads is not guaranteed.