THREAD GUIDE
Watch this helpful video to see how to thread your machine!
Threading Order
Threading Instructions
Cone Guard
Be sure the Cone Guard is in place, insert the thread
cone onto the cone holder. Pull the thread up from
the cone.
Thread Lead Off
Take the thread from the cone, up through the hole in
the end of the Thread Lead Off guide and then
through the middle hole from right to left.
Small Guide
Take the thread through the back of the small thread
guide, continuing toward the needle end of the
machine.
Intermittent Tension Thread Guide
Push a loop of thread through the Intermittent
Tension thread guide.
Intermittent Tension
Open the loop and put it around the Intermittent
Tension between the discs.
Gammill, Inc.
5 |
P a g e
