Menu Operation
The on-board menu allows you to setup the light to your needs. The ORUX 700 is also
RDM enabled for remote setup, configuration, and monitoring.
MENU
Address
DMX Address Set DMX Address, 1-512
Work Mode
DMX Mode
Set the signal mode, the only option is
DMX mode for this fixture.
CH Mode
Set the DMX
Channel
Mode
39 CH Mode1– Default Mode
14 CH Mode2– Simplified Mode
Test Mode
Sets the unit in TEST mode – allowing you to manually
scroll and set values for each parameter of the light.
XY Setup
Allows you to
invert and
modify the
pan and tilt.
X Invert: Inverts the pan of the light.
Y Invert: Inverts the tilt of the light.
XY Speed: Can be used to slow down the
speed of the light. Default is “High”.
Signal
Allows you to see a readout of the DMX values being
received.
System
Allows you to
change
system-wide
setttings.
Backlight Time
Screen Direction
Language – English or Chinese – CHANGE
WITH CAUTION!
Reset
Does a re-homing of the unit.
ORUX 700 Hybrid – GAMMA LED Vision
Page 9 of 20
