1. Read First
First of all, thanks for buying this fascinating piece of hardware and software and we hope you can
conduct many interesting and trouble free measurements. If you have feedback please do not hesitate to
contact us ([email protected] or directly one of the staff). Feedback from our users is a strong
element of our hardware and software evolution.
1.1 EMC Notice
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
Operation is subject to the following two conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications made to this equipment not expressly approved by (GAMMA Remote
Sensing AG) may void the FCC authorization to operate this equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance of 500 cm between the
radiator (antenna in view direction) and your body. For proper radar imaging, no obstacle must be
between the antennas and the target area during image acquisition at all (shadow effects).
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
1.2 Safety Guidelines
Follow these guidelines to ensure general safety:
•
Keep the working area clear during installation and instrument operation.
•
Wear safety glasses if you are working under any conditions that might be hazardous to your
eyes.
•
Do not perform any action that creates a potential hazard to people or makes the equipment
unsafe.
•
Disconnect all power by turning off the power and unplugging the power cord before installing
or removing a chassis or working near power supplies
•
Do not work alone if potentially hazardous conditions exist.
•
Never assume that power is disconnected from a circuit; always check the circuit.
•
There are no user serviceable parts in the RF Assembly or the Instrument Controller Box.
The Instrument Controller Box must not be opened with the power cable attached!
1.3 Operating Safety
•
Electrical equipment generates heat. Ambient air temperature may not be adequate to cool
equipment to acceptable operating temperatures without additional measures.
•
Ensure that the RF assembly and Instrument Controller cover is secure. The design allows
