9
7100 Series Installation/Operating Manual —
P/N 9000-0447:J 08/28/08
System Overview
Control and Indicators
1.3 Control and Indicators
1.3.1 Switch Controls
The switch controls that appear on
the 7100 Series fire alarm control
panel are listed below:
•
Alarm Acknowledge
•
Trouble Acknowledge
•
Signal Silence
•
System Reset/Lamp test
•
Programming buttons
– Menu/Back
– Back Space/Edit
– OK
•
12 button keypad
Figure 1.3.1 7100 Series Switch Controls
1.3.2 LED Indicators
The following list the LED indicators and color signals that appear on the 7100 Series display
panel.
1.3.3 Audible Sounder
An Alarm/Trouble sounder is located on the Basic System Module (BSM). Figure 1.3.2 illustrates
the BSM sub-assembly.
Figure 1.3.2 Basic System Module (BSM)
• AC Power On (green)
• Ground Fault (yellow)
• Alarm (red)
• NAC 1 Silenced (yellow)
• Supervisory (yellow)
• NAC 2 Silenced (yellow)
• System Trouble (yellow)
• System Silenced (yellow)
• Power Fault (yellow)
