INSTALLING CASE ADAPTERS
As shown below, slide the
Case Adapters
into the slots at the bottom
of the controller cavity until the adapter snaps into place. You should
feel a solid click that confirms the adapter is properly installed.
LEFT SIDE
Only a left side
Case Adapter
should be installed on the left side of
the controller. The label side should be on the bottom and not visible
when installed. You will use one of the adapters labeled L10, L15,
L20, L25, L30, L35, L50.
*
RIGHT SIDE
Only a right side
Case Adapter
should be installed on the right side
of the controller. The label side should be on the bottom and not
visible when installed. You will use one of the adapters labeled
R10A, R15A, R15B, R20A, R20B, R20C, R25A, R25B, R35.
*
*
The number from the adapter label indicates the
thickness of the bottom of the adapter
(lower numbered
adapters are thinner, higher numbered are thicker)
.
L25
R15A
*
The letter from the right side adapter label indicates the
thickness of the back wall of the adapter
(“A” is thinnest,
“B” is medium, “C” is thickest)
.
R20A
R20B
R20C
