background image

2

SAVE THESE INSTRUCTIONS

Your Pool Filter System has been engineered and manufactured to our highest standard for dependability, 

ease of operation and safety. With proper care, it will give you years of durable, trouble-free performance. 

Thank you for your purchase.

PRIOR TO ASSEMBLING AND USING THIS PRODUCT, CAREFULLY READ AND ADHERE 

TO ALL CAUTION AND IMPORTANT NOTICES LOCATED THROUGHOUT THIS MANUAL. 

FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY DAMAGE THE PRODUCT 

OR CAUSE SERIOUS PERSONAL INJURY OR DEATH. 

In this manual, some of the following callouts may be used. Please pay special attention to these. 

CAUTION, IMPORTANT and STOP have the following meanings:

CAUTION

Used when injury or accidents may occur if the operating instructions, work instructions, work procedures, etc. 

are either NOT strictly adhered to or not carried out at all.

IMPORTANT

Used when damage to the device may occur if the operating instructions, work instructions, work procedures, etc. 

are either NOT strictly adhered to or not carried out at all.

STOP

Calls attention to special details or information.

IMPORTANT

DO NOT RETURN PRODUCT TO STORE

For technical assistance and missing parts, call Customer Service toll-free

1.888.339.2546

(press 135 at any time)

Monday through Thursday, 8am to 5:00pm MST; Friday, 8am to 1:00pm MST

Summary of Contents for SandPRO 4516



















Reviews: