SAVE THESE INSTRUCTIONS
11
B. For Pools with 2¼” Diameter Threaded Hose Connectors
These instructions assume that the pool is already assembled with hoses attached to the water intake and return
ports on the pool.
1. Short INTEX® Adapter Installation
a. Screw the short INTEX® adapter into the transparent hair & lint strainer cover
on the water pump.
b. Make certain that O-Ring C (1½" dia) is in place before securing.
2. Pool “Skimmer Hose” Attachment
a. Attach the pool skimmer hose (outlet of pool) to the short INTEX® adapter.
b. Ensure that the flat gasket is installed between the short adapter and the face
of the hose.
3. Long INTEX® Adapter Installation
a. Verify there is a O-Ring inside of the adapter. If not, insert O-Ring.
b. Screw the long INTEX® adapter onto the pool return port on the tank cover.
4. Pool Return Hose Attachment
a. Screw the pool return hose (inlet of pool) to the long INTEX® adapter on the tank cover.
b. Ensure that the flat gasket is inserted between the adapter and the face of the hose.
Note:
Be careful not to secure return hose to the waste/backwash port.
IMPORTANT
Ensure that all hose connections are tight and that the hoses
are NOT kinked or bent at severe angles.
5. Completed Filter-Pump Installation should resemble the figure shown at right.
CAUTION
Do not power pump at this point.
To Pool
Return
From Pool
Skimmer
O-Ring C
Flat Gasket
Flat Gasket
0-ring
0-ring
Intex®
Adapter
Intex®
Adapter
Hose
Summary of Contents for SandPRO 4516
Page 17: ...SAVE THESE INSTRUCTIONS 17...
