Gamatronic Electronic Industries Ltd.
Power+ Technical Guide
81
10.3
CONTROLLER USER INTERFACE
The controller’s user interface includes:
y
40 × 4 LCD panel
y
6 Navigation Keys
y
3 Quick Command Buttons
y
8 Indication LEDs
y
2 Communication LEDs
10.4 SERVICE
UTILITIES
There are several service programs intended for higher-level users (i.e. technicians,
maintenance staff, etc.).
These programs allow canceling and performance of low-level operations in the system at the
same time. These operations are complex and can modify the system configuration, affecting
its operation. The service utilities should only be used by authorized personnel.
These service utilities allow the operator to:
y
Change
configuration
y
Manually turn off and on UPS
y
Test dry contact outputs
y
Switch to alternative version of the software
y
Change communication settings
y
Restart the controller
y
Restart the network adapter
10.4.1 START-UP
SCREENS
The welcome screen is displayed for a few seconds when the controller is switched on or
restarted, and is immediately followed by a self-check test.
On completion of the self-check test the initializing screen appears and remains on display until
the controller’s restarting process is completed. The software’s version is shown on the second
row. The time remaining in the restart process appears on the fourth row of the screen. The
main screen appears once the initializing screen closed.
The main screen provides the basic and essential information about the real-time status of the
power system. The LED indicator lights located to the right of the screen, warn if there is a
problem. The main menu remains displayed until one of the keys is pressed. The controller
automatically returns to this main menu screen whenever a key is not pressed for five minutes.
