Tools that are needed but
not
supplied with the high post solar lamp set are:
A screw driver
A wrench
An electrical drill (this will be used to anchor the lamp base to the ground)
Solar Lamp Post Location
For optimum light duration throughout the night, it is very important to mount your solar lamp post in a spot
where it will receive the maximum amount of sunlight throughout the day.
Operation Instructions
Turn the exterior switch according your needs as follow (Fig. 1):
ON - Light turns on automatically at dusk and will be brighter when motion is
detected. The Light duration when Motion sensor is activated is about 45 Second
And then return to a normal mode.
PIR - Light automatically turns on only when motion is detected.
In this mode the Sensor Motion will activate the light always in Bright Light
During 45 second only.
OFF - Light is off.
Motion Sensor
: you can adjust the motion sensor angle as shown in Fig. 2.
Fig. 1-
Operating
Switch
Fig. 2-
Motion Sensor Angle
A
B
C
