5
2.
Mounting with solar panel facing the opposite direction as the lamp.
a.
Insert Part A into the groove at the bottom of Part F with the
tapered end of the wedge going into the lamp
(Fig.9)
.
NOTE:
Push the part into the groove firmly so it does not easily slide
out.
(Fig.10)
b.
Attach Part A to Part C and secure with screw cap (Part H).
(Fig. 11)
c.
Insert Part C into the groove at the top of Part G with the
tapered end of the wedge going into the panel
(Fig. 8). NOTE:
Push the part into the groove firmly so it does not easily slide
out.
d.
You can adjust the angle of the completed assembly by
loosening the screw (Part H) and tilting the product to the
desired angle. Re-tighten Part H to secure product in the new
position.
e.
Connect the solar panel and the lamp head cords together
and secure using the screw connector
. (Fig. 11)
Operation Instructions
1.
Connect the wire from the solar panel to the lamp and secure
with the threaded cap on the wire.
NOTE:
an extension cable is
included (Part I) for use when the solar panel is mounted
separately from the lamp.
2.
Turn the external operation switch to the Low or High position
(Fig 12)
. according to your preferences:
a.
Low: For softer light and longer duration.
b.
High: For brighter light output and shorter duration.
3.
The solar lamp will automatically operate at dusk.
Replacement batteries are available at
our Toll-free number: +1-800-835-4113
Fig. 12
Fig. 9
Fig. 10
Fig. 11
