3
Our GS-203 model boasts multiple installation options. These instructions will
explain how to assemble the different pieces to each other. Please use this as a
guide and choose the mounting option/combination that works best for your
situation.
Step 1. Mounting Bases to lamp and/or solar panel
This product comes with two stake mounts (Part D) and one flat mount (part E).
Choose the one(s) that fit best for your desired mounting location.
1.
Attach Part A to Part D or E
(Fig. 1)
and secure by screwing
Part H clockwise into the threaded section.
2.
Next, Part A can be attached to Part F
(Fig. 2)
or G
(Fig. 3)
by
sliding the tapered end of the wedge into the groove at the
bottom of the lamp or solar panel.
NOTE:
Push the part into the
groove firmly so it does not easily slide out.
3.
You can adjust the angle of the completed assembly by
loosening the screw (Part H) and tilting the product to the
desired angle. Re-tighten Part H to secure product in the new
position.
4.
If you plan to attach one of the mounting bases to both the
lamp and solar panel, repeat steps 1-3 to have a mount for each
of Part F and G.
5.
If using Part E, drill two holes into your mounting location
using the base as a template. Secure the base using the
hardware in the package (Part J)
6.
If using Part D, firmly insert the stake into the ground of the
desired location.
Fig. 2
Fig. 3
Fig. 1
