1.
Insert the GS Solar LED Bulb into the
Fixture (Part A) by twisting Clockwise.
NOTE:
Make sure to grip the light bulb by the
base only and NOT the glass lens.
2. Turn the operation switch to the Low
or High position according to your
preferences.
3. Attach the Dome (Part B) by lining up the
tabs on the Fixture (Part A) and twisting
the dome clockwise until it is firmly
secured.
1.
Insert the GS Solar LED Bulb into the Fixture (Part A) by twisting
Clockwise.
2. Turn the operation switch to the Low or High position according to
your preferences:
Low = Softer light and longer duration
High = Brighter light output
3. The solar Lamp will automatically operate at dusk.
Assembly Instructions
Operation Instructions
Replacement Batteries and Bulbs are available at
www.gamasonic.com or via our Toll Free number: +1-800-835-4113
Your Lamp can use the following bulbs:
A60WW20W – included bulb with Warm White LEDs (2700K)
A60BW20W – bulb with Bright White LEDs (6000K)
F30WW05W – Flame bulb with simulated flame LEDs
Your Lamp uses two of the following battery:
GS32V30
Replacement Parts
page 3
3” Fitter/Pole Mount
1. Place the Washer (Part F) on the threaded rod
at the top of the Fixture (Part A) and then
tighten the Finial (Part E) by twisting
clockwise until it is secure.
2. Attach the 3” Fitter Bracket (Part C)
to the Fixture (Part A) using the
four small screws.
3. Place the completed lamp assembly
on your existing 3” pole. Secure it
to the pole by tightening the three
setscrews at the base of the 3” Fitter Bracket
(Part C)
Wall Mount
1.
Place the Wall Bracket (Part D) in your
desired mounting location. Using the
bracket as a template, mark the two holes
that will need to be made.
2. Using an electric drill, drill two holes no
larger than the size of the Anchors. Insert the
anchors fully into the holes.
3. Line the Wall Bracket (Part A) up with the
Anchors and secure using the screws.
4. Place the Washer (Part F) on the threaded
rod at the top of the Fixture (Part A) and
secure the Fixture (Part A) to the Wall
Bracket (Part D) by twisting clockwise. Make
sure the lamp is securely tightened to the
bracket.
