MODEL AT3
3 – 5
QUICK START UP
1.
The "SETUP" menu. The parameters that can be chosen are: units (use the arrows), the
resolution of the main display in digits to the right of the decimal point, and the instrument
damping. See Figure 3-5. The "Display" menu allows the user to set the top screen to display
"Raw Data" (which is given In COUNTS) or "Reading" that is the "Raw Data" mathematically
transformed into the user-defined units and system summary. Press "PREVIOUS" or "MAIN
MENU" to return to the main menu
Units: PPM
Display: System Summary
SETUP
Resolution: 3 Digit
Damping: 1 Sec
Sensor: 5 MHz
Figure 3-5: Setup Menu
1.a. Press “Display in the setup menu to select the “Raw Data” System Summary or Reading. See
Figure 3-6.
Raw Data
Reading
DISPLAY
System Summary
Figure 3-6: Display Menu
1.b. First the sensor frequency must be set to match the sensor being used (“5 MHz or 15 MHz).
See Figure 3-7.
5 MHz
15 MHz
SENSOR:
Figure 3-7: Sensor Menu
Summary of Contents for Monitek AT3
Page 23: ...MODEL AT3 3 11...
