© Copyright
Gallo Technologies
. All Right Reserved
- 4 -
061515V54RS
If the system has been triggered while in the
armed
mode, the siren will chirp and the parking lights
will flash four times, when the unlock button is pressed.
b.) Unlock only (when vehicle occupied)
When the ignition is
ON
, and the system is
disarmed
, pressing
button will unlock the doors. The
system will stay in the
disarmed
mode.
c.) Trunk Release:
Press and hold
button for 2 sec. the lamps will flash 4 times the doors will unlock and the trunk
will open and the system will be in the
disarmed
mode. The system will not re-arm unless the lock
button
is pressed 1X. Trunk release can also automatically rearm. See “Table 1 Option # 7 page 9
NOTE: Siren chirp off/on is user programmable. See Table 1 option 5.
Auxiliary
Button: Auxiliary output
a.) When Function Option #9 is set to default (unlock doors):
Press and hold
button for 2sec, the doors will unlock and the Auxiliary output will activate. The system
will disarm; pressing the
button will rearm the system.
b.) When Function Option #9 is set to optional (do not unlock doors):
Press and hold
button for 2sec, the doors will not unlock and the Auxiliary output will activate. The
system will disarm; pressing the
button will rearm the system.
NOTE: 1.Auxiliary output duration time is user programmable. See “Table 1, Option # 8.page 9.
2. Auxiliary output can also automatically rearm. See “Table 1 Option # 7 page 9.
Locating/Function
Button: Auto Door Lock /Car-Locating/Remote Start
a.)
Auto Door Lock enable or disable:
(doors will or will not auto lock when walking away from the car)
When the system is in the disarmed mode, pressing and holding
button for 2 sec will enable or
disable the RFID auto door lock function. (parking lights flash 1 time when disabled or parking lights will
flash 3 times when enabled )
b.) Car Locating:
When the system is
armed
, holding
button for more than 2 seconds, the siren will chirp and the
parking lights will flash five times.
c.) Remote Start:
When the system is in the armed mode, the doors are closed, the hand brake is set, and the Key FOB is
out of range, the engine can be started by pressing
button 2x within 2 sec of each push. See Sec 1.4
page 6 for complete Remote Starting operation.
Turning ACC, IGN1, IGN2 ON/OFF and Starting the Engine:
When in Disarm mode and the RFID key FOB is in detection range.
To Turn ACC ON/OFF
Press
“Start Stop Engine”
button 1X then release, ACC will turn ON; press
“Start Stop Engine”
button 1X
again then release, ACC will turn OFF.
OFF
ACC
ON
Press button once
then release it
Press button once
then release.
1.3 “PUSH START STOP” Button Operation
