4
MB SERIES
Safety Information
Please read all enclosed safety precautions
before connecting or operating this product.
Verify Line Voltage and Amperage:
Your
new MB Series Bass amplifier has been factory
configured for use with the specific line voltage
for your location:
120 Volt/60Hz 15 A circuit for USA/Canada.
230 Volt/(50/60Hz) 10 A circuit for
UK/Australia.
230 Volt/(50/60Hz) 10 A circuit for Europe.
100 Volt/50Hz 15 A circuit for Japan.
220 Volt/50Hz 10 A circuit for Korea.
Proper AC circuit for all other countries.
Connecting the amplifier to a line with
specifications other than indicated above can
create safety and fire hazard, and may damage
the amplifier. If you have any questions about
the voltage requirements for your specific
model, or about the line voltage in your area,
contact your dealer before plugging the unit into
a wall outlet.
Verify AC Circuit Capacity Before Use:
The high power output of your amplifier may
require heavy current draw
under full-load
conditions. To insure proper performance and
avoid potential safety hazards, we recommend
connection to line circuits with amperage
specified “as above”. Connecting to the same
circuit used by other heavy-power devices,
such as high-wattage lights, may cause circuit
breakers to trip. It is always a good idea to avoid
using any audio equipment on the same AC circuit
as equipment with motors, such as air
conditioners or refrigerators. This will lessen the
possibility of power variation and electrical
start-up noise affecting your sound.
Please refer to page 10 for more instructions
concerning installation.
AC Power Cord:
To avoid safety hazards, use only the power cord
supplied with your unit. If a replacement cord is
needed, make certain to use a standard IEC
compliant cord. Damaged power cords should
be replaced immediately. When setting up, make
certain thattheAC plugiseasilyaccessible. Ifyoudo
not intend to use the amplifier for a considerable
length of time, disconnect the plug from the AC
Mains Socket. Do not use an extention cord.
Earth Grounding Connection:
To prevent electric shock, do not remove the
grounding plug on the power cord, or use any plug
or extension cord that does not have a grounding
plug provided. Make certain that the AC outlet
is properly grounded as well. Do not use an
adapter plug with this product.
Do Not Open the Amplifier Enclosure:
There are no user serviceable parts inside this
product. Opening the amplifier enclosure may
present a shock hazard. Modification to the
product will void your warranty.
If liquid
enters the unit, or any metal object such as a
paper clip accidentally falls inside the enclosure,
disconnect the unit from the AC power source
immediately and consult an authorized service
station.
Setup:
To insure proper operation and to avoid poten-
tial safety hazards, place the unit on a firm, level
surface. Do not plug or unplug the instrument
or speaker cable while the amplifier power is on.
Speaker Cables:
To prevent electric shock, use “Class II Wiring”
speaker cable or speaker cable with double or
reinforced insulation when connecting to speaker
cabinet.
Heat & Ventilation:
Make sure there is space provided for proper
ventilation. Avoid using in extreme hot or cold
locations and areas that are exposed to direct
sunlight or near heating equipment. Avoid using
in moist or high humidity areas.
NEVER
BLOCK THE FAN VENT HOLES ON THE
SIDES OF THE UNIT.
Summary of Contents for MB200
Page 1: ...MB 200 OWNER S MANUAL ...
