5
HR66000002 - 02
È severamente vietata la riproduzione anche parziale di questo manuale / All copying, even partial, of this manual is strictly forbidden
5
ORIENTAMENTI
Per ogni grandezza esistono 4 possibili orientamenti del recuperatore.
In funzione della configurazione delle rete e della spazio disponibile si potrà
quindi scegliere fra le 4 tipologie sotto illustrate.
5
POSSIBLE CONFIGURATIONS
For each size available there are 4 different positions for the recuparators.
Depending on the net configuration and available space, one of the 4
possibilities below may be employed.
Semplicemente cambiando di posizione 2 pannelli è possibile aspirare o
espellere l'aria lateralmente anzichè sul fronte dell'unità:
1) svitare il pannello superiore in corrispondenza del ventilatore da
orientare; oppure il pannello inferiore se il recuperatore è già installato;
2) togliere il pannello frontale con la bocca di uscita che si vuole spostare;
3) togliere il pannello laterale cieco dove va posizionata la bocca di uscita
del ventilatore;
1
2
3
By simply changing the positions of two panels it is possible to suck or blow
out air from the sides instead of from the front of the unit:
1) remove the upper panel near the fan that has to be oriented; or yhe
lower panel uf the heat recovery unit has already been installed;
2) remove the front panel with the air outlet hole that has to be moved;
3) remove the side panel where has to placed the air outlet hole of the
fan;
ESTERNO
OUTSIDE
INTERNO
INSIDE
Tipo "A" - Type "A"
Tipo "C" - Type "C"
Tipo "B" - Type "B"
Tipo "D" - Type "D"
INTERNO
INSIDE
ESTERNO
OUTSIDE
ESTERNO / OUTDOOR
INTERNO / INDOOR
INTERNO / INDOOR
ESTERNO / OUTDOOR