![Galletti REKO 06 Installation - Use - Maintenance Download Page 18](http://html.mh-extra.com/html/galletti/reko-06/reko-06_installation-use-maintenance_559243018.webp)
18
HR66000002 - 02
reko
È severamente vietata la riproduzione anche parziale di questo manuale / All copying, even partial, of this manual is strictly forbidden
8.1.2
VERIFICA DEL RECUPERATORE
. E’ possibile smontare il pacco recuperatore dal basso, togliendo la
vasca di raccolta condensa.
. Verificare che lo scambiatore sia libero da qualsiasi impurità:
- Svitare i nottolini (1);
- Sfilare la vasca (2);
- Estrarre il recuperatore.
8.1.2
UNIT RECOVERY CHECKLIST
. It is possible to dismantle the recuperator from below, removing the
condensation drip tray.
Verify that the plate exchanger does not demonstrate signs of
impurity:
- Uncrew the plugs (1);
- Remove the tray (2);
- Extrack the recuperator pack.
8.1.3
VERIFICA DELLO SCARICO CONDENSA
. Togliere il pannello e pulire se necessario le incrostazioni e le impurità
presenti nella vaschetta di raccolta condensa;
. Verificare l'efficienza del sifone.
8.1.4
VERIFICA DELLA BATTERIA AD ACQUA
. Verificare che la batteria ad acqua (accessorio) sia pulita e in perfetto
stato per garantire le prestazioni dichiarate.
8.1.3
CONDENSATE DISCHARGE CHECKLIST
. Remove side panel and clean, if necessary, the dirt and impurities
that have formed in the condensation tray.
. Also check the efficiency of the siphon.
8.1.4
WATER COIL CHECKLIST
. Check that the coil exchanger (optional ) is clean and in perfect state
to guarantee the normal levels of performance.