FC66005368
All copying, even partial, of this manual is strictly forbidden
13
7 ELECTRICAL CONNECTION DIAGRAMS
The connections dotted must be made by the installer. For each unit an (IL) switch should be mounted on the power supply, with
opening contacts at a distance of at least 3 mm and a suitable protection fuse (F) .
Make the electrical connections with the power supply disconnected, in accordance with current safety regulations, and following
the base wiring diagram and pertinent legend.
Check that the mains electricity supply is compatible with the voltage shown on the unit rating plate.
The electrical connections indicated must be made by the installer.
For each fan coil a switch (IL) should be mounted on the power supply, with opening contacts at a distance of at least 3 mm and a
suitable protection fuse (F).
» 71
Base wiring diagram
1:
Control panel connection (accessory)
BK:
Black= GND
BN:
Brown= motor supply line
BU:
Blue = neutral motor and fan supply
YE:
Yellow = 0-10V signal
CN:
Fast-on connector
F:
Protection fuse not supplied
IL:
Circuit breaker (not supplied)
MV:
Motor
