ENG - 12
INSTRUCIONS
OPERATION
Place the scale on a level surface
Press “ON/OFF” key and the display will show “18888” and
than “0”
Place object on the weighing platform and weight of object
will show on the screen display.
TARE FUNCTION
To weigh different loads consecutively without removing loads from the scale. Put first Load
on the scale, get weight reading. Press „TARE“ button to reset the LCD reading to „0“ before
adding next load. You can repeat this operation.
UNIT OF MEASUREMENT:
Press the “Unit” button, to change from Grams to Ounces.
WARNING INDICATORS
1. Replace new battery.
2. Scale overload. Remove item to avoid damage.Max.Weight
capacity is indicated on the scale.
BATTERy REPLACEMENT
This device can only be used with AAA batteries.
Clean Battery contacts and also those of the device prior to battery installation.
Should product be unused for a long period of time, remove batteries.
Leaking batteries must be replaced immediately.
Remove used batteries with care
CLEANING AND MAINTENANCE
Clean the scale with a slightly damp cloth. DO NOT immerse the scale in water or use
chemical/abrasive cleaning agents.
All parts should be cleaned immediately after contact with fats, spices, vinegar and strongly
flavored/colored foods. Avoid contact with acids citrus juices.
TROUBLEShOOTING
The device is not working
- Check the rights position of battery and the polarity.
- When warning indicator shows „Lo“ replace the battery.
1)
2)
3)
1)
2)
3)
4)
5)
1)
2)
Summary of Contents for Sedan BAC 712
Page 16: ...ENG 16 ...
