ENG - 31
ENG
INsTrUcTION fOr UsE
bATTEry
2x3V lithium batteries (CR2032). Please remove the isolation sheet
from the battery contact before use. Observe the polarity.
TO INsTALL bATTEry
Instalation:
1) Open the battery case cover at the bottom of scale.
2) Take out the used battery with the aid of a sharp object, as shown
in picture.
3) Install new battery by putting one side of the battery beneath
the battery baffle and then pressing down the other side.
TO sET wEIghT UNIT
You can set to the one you prefer by pressing the unit conversion button.
Press the unit conversion button when scale is power off, LCD shows current weight unit.
Press the button again to convert weight unit.
At the bottom of scale, you can find a unit conversion button as shown
in picture.
After selecting the prefered unit, the scale will be auto-off after
3 seconds. Selected weight unit will be activated when the scale
is turned on again.
• When setting lb/st as weight unit, the default height unit is feet/inch.
• When setting kg as weight unit, the default height unit is cm.
