18
/ 26
–
Do not insert to or take the plug out of a socket with wet hands and do not pull the power
cord!
–
Do not let the appliance in operation without supervision!
– Do not put the hair straightener on hot heat sources (e.g.
oven, stove, radiator
).
– No part of the appliance can get in contact with places sensitive to heat (e.g.
eyes, ears, neck
).
– Take care when handling the appliance, try to prevent injury (e.g.
burns
). Heating plates are hot!
– Any modification of the appliance surface (e.g. by means of
self-adhesive wall-paper, foil
etc.)
is prohibited!
– When the appliance is switched on for the first time, short and slight smoke can come out that
does not mean any defect and it is not a reason for claiming a defect of the appliance.
– Do not put the appliance into bodily holes.
– If the hair straightener is stored at lower temperatures, first of all let its temperature adapt to the
environment and thus you will maintain firmness of the plastic parts.
– The hair straightener must not be used for styling wigs, hairpieces or artificial hair.
– Hair straightener can be used for styling natural, coloured or bleached hair. But do not use it for
styling hair that is treated with chemical substances (e.g.
hairspray, styling agent, etc.
), the
temperature effect could be reduced due to sticking of chemical substances on the plates.
– Also, do not put the hair straightener on soft and easily flammable surfaces (e.g.
bed, towels,
sheets, carpets
); they could be damaged by hot parts of the appliance.
– When handling the hair straightener, protect the power cord from contact with the hot surface of
the plates or other sources of heat.
– Switch off the hair straighteners right after its use, unplug it from power supply and let it cool
down. Then put it on a safe dry place, out of reach of children.
– Check the condition of the power cord of the appliance regularly.
– Do not wind the power cord around the appliance; this will extend life of the power cord.
– The power cord must not be damaged with sharp or hot objects, open fire, it must not be sunk
into water or bent over sharp edges.
– If you need to use an extension cord, it has to be uncorrupted and it has to comply with the valid
standards.
– Never use the appliance for any other purpose than for that described in these instructions for use!
– The manufacturer is not responsible for damage caused by improper handling of the appliance
(e.g.
fire, burning, hair damage, etc.
) and its guarantee does not cover the appliance in the
case of failure to comply with the safety warnings above.
II. DESCRIPTION OF THE APPLIANCE
A – hair straightener
A1 –
0 / I
button
A5 – Iron´s end
A2 – temperature regulator
A6 – turning joint of power cord
A3 – control lights
A7 – power cord
A4 – heating plates
A8 – slider control of jaw lock
III. INSTRUCTIONS FOR USE
Remove all the packing material and take out the hair straightener. Put the hair
straightener on suitable even surface (see par.
I. SAFETYWARNING
). Plug power cord
connector
A7
to an electric socket. Set regulator
A2
to the required temperature (140 - 230 °C)
according to the type of hair. Switch on the hair straightener by pressing
A1
button to
I
position.
Control light
A3
will turn red, which signals heating of the plates. As soon as the set temperature
is set, control light
A3
will turn green. Then the temperature will be kept automatically. Switch off
the appliance after use by pushing
A1
button to
0
position (control light
A3
will go out) and let it
cool down before putting.