ENG
19
/ 26
18
Automatic switch off
When you step off the scale, it will automatically switch off.
Auto shut-off occurs if display shows „0.0“ or shows the same
weight reading for approximate 8 seconds.
Note
If the scale was moved to new place, it may cause some error
for he first times.
kg/lb/st
To convert weight unit
Find unit switch on the back of scale. If you wish to set unit to
kg or lb or st, adjust the switch on the bottom of the scale.
• kg = kilogram
1 kg = 2.2 lb
• lb = pound (British weight unit) 1 lb = 0.454 kg
• st = stone (American weight unit) 1 st = 6,356 kg
Troubleshooting
Error and other LCD message
LCD may show occasionally error message. Simply turn off the unit for a brief moment, or
remove and re-install battery as a total re-set. Then turn on again to resume operation.
If, when you tap the scale to activate it, there is no display at all or „LO“ is displayed- try two
new batteries.
Scale overload.
Please step off to avoid damage.
Display shows „
C
“ when you step off the scale, means
this reading with error. Please re-test.
Troubleshooting guide
• Check the rights position of battery and the polarity.
• When warning indicator shows „Lo“ replace the battery.
• Check whether the scale is on a flat, level floor and not touching against a wall.
• Ensure whether you do not step on the scale until the display shows „0.0kg“.
• If unusual signs are displayed, remove the insert the battery again.
