Gallet CCH 81, Instruction Manual

Page: 25 / 44

EN - 25
EN
III. INSTRUCTION FOR USE
Remove all packaging material, remove the appliance. Remove all adhesive foils, stickers
or paper from the appliance..
Controller (B)
0 off
1
low temperature (30 - 35 °C)
2 medium temperature (40 - 35 °C)
3 high temperature (35 - 40 °C)
Note:
When the controller is switched to positions 1-3, the operation signal light B2 will turn on.
Use:
• Lay the electric blanket flat on the bed. The end without controls is the foot end. Put only
spread sheets on the blanket, so as to help the conduct of the heat and check whether
the electric blanket is not creased. You can cover the blanket with a quilt.
• Connect the appliance to mains.
• Set the required temperature by the switch on B controller.
• If you want to preheat the bed, set the controller switch to position 3. Normally, preheat
takes 30 minutes. Afterwards, you can push shift button to “2 or 1 position” according to
your needs so as to keep the right temperature.
• You may turn off the blanket at any time by switching the switch to the position 0.
• Dual control: Two people can adjust the temperature according to their needs. The
individual settings do not interfere (only applies to CCH 160 type).
• When the electric blanket is on, the control must not be covered. Make sure not to put
the control under the quilt or the pillow, or other objects, let alone close to other heating
sources - the control could be overheated and damaged.
• If you sleep on the blanket, can not be turned on all night.
IV. MAINTENANCE
Disconnect the controller B from the heating blanket A . Wipe the controller B with a damp
cloth. The heating blanket A may be machine washed. However we recommend hand-
washing to prolong the appliance service life. Never use any aggressive cleaning agents
and industrial solvents for cleaning. After washing, hang the blanket over clothesline
(do not use pins) and let it completely dry.
Washing the blanket in a washing machine
Before washing the heating blankets, make sure that the blankets are in a good working
condition and are not damaged.
1) Take the blankets from the bed and disconnect the detachable connector to make sure
that the controller and power cord are not connected to the blankets.
2) Put the blankets in the washing machine as when washing clothing. You can put the
whole blankets in the washing machine, however, it is necessary to disconnect and
take the switch out.
3) After 10-15 minutes of washing, stop the washing machine and let the blankets dry.
4) Make sure the blankets are dry and connect the detachable connector.