Accessories
After any vacuuming it is recommended to check visually the brushes or collectors
for possible impurities. If there are some impurities, remove them.
Input and output filters
Rinse the output filters
A9
under running water.
Shake out the HEPA filter
B5
gently, or blow it out. If the HEPA filter is very dirty,
you can rinse it under running lukewarm water. Allow it to dry out properly.
Caution
– Do not clean the HEPA filter or the other filters with any aggressive washing or cleaning
detergents or hot water.
– In order to maintain the filtering parameters of the HEPA filter, we recommend that you
use a dry method of cleaning.
–
If you clean the HEPA filter with water, its filtration properties will deteriorate.
The filter cannot be washed more than three times. After that, a new filter needs to be
purchased.
– If the filters are not cleaned or replaced, it might result in damaging the vacuum cleaner!
Dust container
Clean the dust container with a wet cloth. Allow all the parts to dry out properly before re-use.
Other parts
Clean the telescopic suction tube
C7
and suction hose
C6
with a wet cloth. Allow all the
parts to dry out properly before re-use.
VII. TECHNICAL DATA
Voltage (V) / Input (W)
specified on the type label of the appliance
Protection class of the appliance
II.
Weight (kg) approx.
5.4
Size of the product (mm)
280 x 350 x 250
Input in off mode is 0.00 W
The manufacturer reserves the right to change the technical specifications and
accessories for the respective models.
VIII. LEGISLATIVE & ECOLOGY
WARNING:
DO NOT USE THIS PRODUCT NEAR WATER, IN WET AREAS TO
AVOID FIRE OR INJURY OF ELECTRIC CURRENT. ALWAYS TURN OFF THE
PRODUCT WHEN YOU DON’T USE IT OR BEFORE A REVISION. THERE
AREN’T ANY PARTS IN THIS APPLIANCE WHICH ARE REPARABLE BY
CONSUMER. ALWAYS APPEAL TO A QUALIFIED AUTHORIZED SERVICE. THE
PRODUCT IS UNDER A DANGEROUS TENTION.
EN
26 / 32
