7
English
Gallagher 3E0795 BX / MBX User Manual
Installa on Guide
INSTALLATION GUIDE
Mains Operation only
See “For Mains Opera on with Ba ery Back-up and for Ba ery Only Opera on”, for installing the
energizer with ba ery back-up or with full ba ery opera on.
Step 1: Install the Energizer
a) Mount the energizer on a wall, under cover, out of reach of children. Install where there is
no risk of the energizer incurring
fi
re or mechanical damage and if possible away from heavy
electrical equipment eg. pumps or other items that may cause electrical interference.
Note: Install the energizer in a frequently accessed place. The displays and alarms give
valuable informa on that can save me and help prevent costly problems.
b) Using the template on centre pages, drill 3 x 4mm (
5
/
32
”) holes (A,B & C). Fix the screws
provided into the wall leaving the head of the screw about 3mm (
1
/
8
”) out from the wall.
Place the energizer over and slide down onto the moun ng screws.
Step 2: Connect to earth (ground) system
Using Underground Cable (G6270) remove 5cm (2”) of plas c coa ng from one end of the cable and connect to the
green
( ) terminal on the energizer. A ach the cable to the earth system by removing 10cm (4”) of insula on from the cable at
each Earth Stake (G8790), then clamp the
exposed wire to each stake using an Earth Clamp (G8760). Tighten the clamp.
For further instruc ons on the earth (ground) system see the Gallagher Power Fence™
Manual enclosed.
Reference Earth:
An addi onal earth stake is required to allow correct measurement of the earth
voltage. Install a single stake (G8780) at least 60cm (2 ) long, at least 5m (16 )
from the main energizer earth system and at least 10m (33 ) from any power
supply earth peg, underground telephone or power cable. Using Underground
Cable (G6270) connect the reference earth stake to the black ( ) terminal on
the energizer.
Accessories
Your SmartPower Energizer is supplied with the following:
• 3
moun ng screws
•
SmartPower operator’s manual
•
Quick reference help guide
•
Gallagher Power Fence™ Manual
• Ba ery Power lead
To get the best from your SmartPower Energizer
The SmartPower Energizer is a commitment to a reliable, high performance Power Fence system. To gain op mum
performance from your energizer you may need to improve your earth system, the quality of your lead-outs, fence design
and construc on. Please read the “Understanding your SmartPower Energizer” sec ons of this manual to understand
what the LCD informa on tells you. This informa on will help you achieve a very reliable, high performance Power Fence
system.
Use Gallagher Power Fence™ accessories to gain maximum performance from your SmartPower Energizer.
Smart
Power
TM
RED
GREEN
BLUE
BLACK
To Fence
To Earth System
To Reference Earth
To Sec on of Fence
IMPORTANT:
If the Reference Earth is not connected, the earth voltage display will
fl
ash 0.0.
Note that if your earth is near perfect, the display may also
fl
ash 0.0. To con
fi
rm that your earth system is good
check the voltage at the stakes is 0.0.
