3Ennnn Gallagher T30 Reader Installation Note| DRAFT2 | July 2020
Copyright © Gallagher Group Limited
Page 8
4.
Drill pilot holes for the four corner fixing holes and the tamper tab. Secure the bezel to the mounting
surface using the four corner fixing screws provided. Secure the tamper tab (located in the bezel) to
the mounting surface using the remaining fixing screw provided. It is important the four corner fixing
screws are used to ensure the terminal is flush with and tight against the mounting surface.
Note:
It is strongly recommended that you use the screws provided. If an alternative screw is used,
the head must be no larger nor deeper than that of the screw provided.
