background image

9

Positioning your Subwoofer

The positioning of your subwoofer will affect the quantity and also 
quality of the lower frequencies of the system.   Locating the 
subwoofer near a wall will increase the bass response of the speaker.   
If it is placed too near to a corner however, the overall effect may be 
too 'boomy'.   Due to the low frequency modal characteristics of the 
room, the response will change as it is placed a little closer, or further 
away from the listening position.   Adjusting the rear panel controls (as 
explained in previous sections) will also affect the sound, so the 
answer is to experiment and find the position and settings that provide 
a good balance between low frequency amount and definition across a 
range of source material.

Taking Care of your Subwoofer

Cabinets should be dusted and lightly polished as required. Do not use 
solvent based cleaners, as they may damage the cabinet surface.   Do 
not expose the cabinets to strong, direct sunlight, high temperatures, 
high humidity or allow them to become wet.

Getting Started

AP12401/4 Gale 3070 Owners' Manual (page nine)

Print Pantone Black

for Koda

Summary of Contents for 3070













Reviews: