G2W – Gal 2 Way – Installation and Operation Guide
23
To install the repeater:
1.
Install the repeater in one of the following ways:
Affix to any vertical surface by inserting screws through the holes in the aluminum plate at the
back of the unit box.
Affix on a metal pipe of 1 ¼" or 1 ½" diameter using the supplied hanging accessories. As an
example, the unit can be affixed to the lower part of the pole to which the antennas are
attached.
2.
Connect the antenna cable to the cable connector at the bottom of the repeater.
Note:
Do not bend the cables below a radius of 30 cm.
3.
Gently gather and affix any extra cable length to the wall or pole on which you installed the repeater.
