G.S.I DC Installation and Operation Guide
15
5.
Make sure that the wires of the battery compartment are well
connected to the power inlet on the G.S.I card.
6.
Insert four Lithium batteries 3.6 V size D. If you cannot obtain
Lithium batteries, use four alkaline D-size batteries.
Make sure to insert the batteries at the right direction.
7.
Return the battery compartment to its place and lock it in place by
turning the latch back until it clicks.
8.
Close the internal casing and gently fasten its screws.
9.
Swing the control panel back into place.
10.
Close and lock the controller cover.
Pay Attention:
Do not use sharp objects to remove or insert batteries.
Do not mix between Lithium batteries and alkaline batteries.
Make sure the exposed tips of the battery compartment wires do not
touch to avoid short circuit.
Safety Precautions:
Warning Danger! Mishandling of the batteries may cause explosion.
Replace batteries only with similar batteries or equivalent power.
Do not expose the batteries or the pack to direct sunlight, heat, or fire.
Do not use harmed or bruised batteries.
Do not get the batteries wet. Water can cause the batteries to overheat.
Dispose of the batteries only in battery recycling facilities.
