background image

8

2.6 Selecting Days of the Week for Irrigation

This setting determines which days of the week the irrigation controller will operate 
the specified valve.

1. Press 

 until 

 appears.

2. Press 

. A blinking arrow appears at the

    top of the display, under Monday.
3. Move the blinking arrow to the desired day
    of the week by pressing 

.

4. Selecting/adding irrigation days:
    Press 

. The arrow under the selected

    day stops blinking, moves one position to
    the right, and blinks under  the next day of
    the week.You can select additionaldays of
    the week in the same manner.
5. Canceling Scheduled Irrigation Days:
    Have the arrow blink under the day you 
    want to cancel. Press

 

. The arrow under the selected day will disappear. The

    blinking arrow will move one position to the right, under the next day of the
    week. Cancel additional scheduled irrigation days in the      same manner.
6. Press 

 to proceed to the next step.

•  When the blinking arrow reaches Sunday, pressing  again displays  in the center of
   the display, and 

 at the top right of the

   display. To return to the “Selecting/Adding
   Irrigation Days” mode, press  once or twice.

2.7 Setting Irrigation Start Times

In this step, up to 4 separate irrigation start 
times can be programmed for a selected day 
for the valve being programmed. The selected 
valve will open at each of the start times set, 
for the irrigation duration set as described in 
Section 2.4.
1. Press 

 until the START I appears.  The

    word  or the last start time set will appear
    on the display.
2. Press 

. The displayed item blinks

    ( 

OFF

 or last start time entered).

3. Set the desired start time by pressing 

 and 

 (Take note of the AM and PM

    designations). Repeat actions 2 and 3 to set start times II, III and IV, as needed.
4. To cancel a specific start time, select it by pressing 

. Next, press 

. The hour

    digits blink. Press 

 or 

 until  the word 

OFF

  appears on the display.

5. To program another valve, select it, and repeat the above steps, starting from
    section 2.3 above. 

Summary of Contents for DC-11SF

























Reviews: