12
3.4 Irrigation Window In the Cyclical Program Mode
The irrigation window function is incorporated
in the “S” series of professional controllers. The
irrigation window is an advanced feature which
enables you to define that the operations in a
cyclical irrigation program (see Section 3.2)
be performed during a specified part of the day
only (window). An irrigation window can only
be defined for an irrigation cycle that is shorter
than a full day (up to 23.59 hours), and only
in the cyclical irrigation mode. If the irrigation
cycle exceeds 24 hours, the window function is
disabled.
This function is useful, for example, when
irrigation is only required during the hot hours of
the day.
1. Press until
appears on the display next
to W. OPEN. The word OFF or the last OPEN
WINDOW time setting entered is displayed.
2. Press . The word OFF blinks on the display.
3. Press
and
to set the desired OPEN
WINDOW time (pay attention to the AM/PM
designation).
4. Press until
appears, with 12:00 PM or
the last CLOSE WINDOW time setting
displayed.
5. Press
and
to set the desired CLOSE
WINDOW time (pay attention to the AM/ PM
designation).
*If an irrigation cycle exceeding 24 hours has
been programmed, the irrigation window function
is disabled.
To cancel the irrigation window
1. Press until appears next to OPEN
WINDOW, along with the display of the last
OPEN WINDOW time setting entered
.
2. Press . The irrigation window open time
blinks on the display.
3. Press until Off appears next to
.
The irrigation window is now cancelled.
Summary of Contents for DC-11SF
Page 22: ...22 0 2 0 0 0 0 0 0 0 4 2 0 5 5 1 2 3 4 5 6...
Page 23: ...23 0 4 4 4 7 8 9 10 11 12 13...
Page 24: ...GDB162...
